Compare quotes for radiator valve replacement in Haslemere
A seized valve is a problem the day you want to decorate or move a radiator. Count how many valves need changing before you call.
One enquiry about the job in Haslemere can reach up to four independent heating engineers, depending on the job and which engineers are free. The matching is free. You can turn down every quote.
Work to include in your enquiry
This job replaces manual wheelhead valves and lockshield valves on radiators. The system is drained or the pipes frozen so the old valves can come off, then the new ones are fitted, the system is refilled and the radiators are balanced.
Things to mention when you enquire
- A valve handle that spins freely
- A valve seized solid
- A valve tail that keeps leaking
- A lockshield with a stripped spindle
- Valves you want updated while decorating
On the day
The way the water is isolated affects the price. The visit usually covers:
- Switching off the boiler and protecting the floors.
- Emptying the system below the radiator, or using suitable pipe freezing and radiator isolation.
- Removing the old valve and tail and fitting the new valve with a new tail.
- Topping up the system with inhibitor and bleeding every radiator.
- Balancing the lockshields so all the radiators heat evenly.
Changing several valves at once saves on labour
Draining and refilling a system takes a similar amount of time whether one valve is changed or six. If more than one valve is tired, it usually costs less to do them in one visit. It is also a good moment to swap flow-side wheelheads for thermostatic valves.
Preparing for the visit
Give the engineer room to reach both ends of each radiator. After the valves are fitted, ask for a hot leak check and balancing, and confirm whether any lifted floorboards will be put back.
Paying for radiator valve replacement in Haslemere
The UK guide range we use is £100–£400. It is a national guide, not a local tariff. One valve changed with a freezing kit sits near the bottom of the range. A pair on one radiator with a drain-down is in the middle. Changing several valves around the house with a full drain, refill and balance sits at the top, and designer finishes or microbore adaptors can add more.
Get the call-out fee, parts and labour broken out on the quote, with VAT stated. Allow 2–4 hours for the work itself; awkward access or waiting for a part can take longer.
What to tell the engineer
Say how many valves need replacing, which rooms they are in and what is wrong with each. Note whether the pipes come up from the floor or out of the wall, and whether they look like standard 15 mm copper or thinner microbore. Say whether the system is a sealed combi or has a feed tank in the loft.
Once quotes arrive, compare the detail. Ask the engineer to confirm draining or freezing, the valve make and finish, refilling with inhibitor, bleeding and balancing the whole system. Check how long the heating will be off.
Qualifications and approvals
Replacing radiator valves needs no planning permission and is not notifiable on its own. In England, Approved Document L expects room-by-room control, usually TRVs, when a boiler is replaced, so fitting TRVs now may save work later.
If you are not sure whether building control needs to know, ask Surrey County Council. If the job expands beyond a straightforward repair, confirm which approvals apply before the extra work starts.
Getting an engineer to Haslemere
Engineers covering Haslemere, Surrey need the full postcode. Mention parking limits or permit zones. Photographs showing the valves and the pipes entering them help with planning. Neighbouring houses often have different systems, so describe the one in yours.
Surrounding towns and villages
Each postcode in Surrey is matched on its own. The businesses able to reply depend on the job and their coverage.
Petworth, Alton, Godalming, Midhurst, Sandhurst, Farnham, GuildfordSend the details when you are ready
The free enquiry form takes a couple of minutes. We ask engineers who join for their insurance details and references, but look at their current documents yourself before you book. We pass on your enquiry. The business you choose gives the advice, sets the price and carries out the work.
For a suspected gas leak in Great Britain, call 0800 111 999 straight away. This service does not arrange emergency call-outs. In Northern Ireland, the gas emergency number is 0800 002 001; for LPG, contact your supplier.
Answers to common heating questions
How can I compare quotes for radiator valve replacement in Haslemere?
Fill in one enquiry form with your postcode and details of the number of valves and whether they leak, seize or spin. It can go to as many as four independent heating engineers who work in Haslemere. How many reply varies with the job and how busy engineers are, and booking any of them is up to you.
Roughly how much is radiator valve replacement in Haslemere?
We use £100–£400 as a UK guide. Engineers in Haslemere price their own work, and the system, access and parts affect the total. A written quote should list labour, parts, VAT and any call-out fee.
Do I need to replace both valves on a radiator?
Not always. If only the wheelhead has failed, it can be changed on its own. Many people replace both while the system is drained, especially if the lockshield is old or seized.
Will new radiator valves stop my radiators being cold at the bottom?
Probably not. Cold bottoms are usually caused by sludge in the radiator. A flush or a clean of that radiator is the fix, and new valves alone will not clear it.
How long will the heating be off for a valve change?
With a freezing kit, often less than an hour per valve. With a drain-down, a few hours while the system is emptied, the valves fitted, and the system refilled and bled.
How long should I allow for radiator valve replacement?
Allow 2–4 hours as a guide. Once the engineer has seen the system, they should tell you how long the heating or hot water will be off. Waiting for a part or awkward access can add time.