Compare quotes for leaking radiator repair in Corby
Brown stains on the carpet under a radiator are often the first sign of a leak. Note which joint is wet without touching hot pipework.
One enquiry about the job in Corby can reach up to four independent heating engineers, depending on the job and which engineers are free. The matching is free. You can turn down every quote.
Work to include in your enquiry
Most radiator leaks come from the valve spindle, the union joining the valve to the radiator, the bleed screw or a pipe joint below. A smaller number come from the radiator panel itself, where internal corrosion has made a pinhole, and those radiators are normally replaced.
Things to mention when you enquire
- Water marks on the floor beneath a valve
- Water on a valve spindle or union nut
- Mineral deposits around a radiator fitting
- Rust spots on the radiator face
- Topping up the boiler more and more often
On the day
The leak point decides the repair. The visit usually covers:
- Drying the area and tracing exactly where the water escapes.
- Shutting both valves to isolate the radiator, or partly draining if they will not close.
- Repacking the gland, remaking the joint, changing the bleed screw or swapping the radiator.
- Refilling and bleeding the radiator, and topping up pressure and inhibitor.
- Running the heating and checking the repair stays dry when hot.
A leak from the panel means the radiator is wearing out
When water comes through the face or seam of the radiator rather than a joint, the steel is corroding from inside. Sealer can slow it for a while, but other thin spots are likely. Ask for a price on a like-for-like radiator with the same heat output.
Preparing for the visit
Move furniture away from the leak if it is safe to do so. Ask who will protect the floor, remove a failed radiator and make good any access opening; repair of water-damaged flooring is not automatically part of a plumbing quote.
Paying for leaking radiator repair in Corby
The UK guide range we use is £90–£350. It is a national guide, not a local tariff. Tightening or repacking a valve gland, or changing a bleed screw, sits at the lower end. Resealing a valve tail with the radiator isolated is in the middle. A new radiator, or a leak below the floor, takes the job to the top of the range or beyond.
Get the call-out fee, parts and labour broken out on the quote, with VAT stated. Allow 1–3 hours for the work itself; awkward access or waiting for a part can take longer.
What to tell the engineer
Say which radiator is leaking, which end, and whether the water comes from the valve, the joint or the panel. Give the radiator size if a replacement might be needed. Say whether the pipes come through a boarded, solid or tiled floor.
Once quotes arrive, compare the detail. Ask whether the quote includes refilling the system to pressure and adding inhibitor. For a replacement, check it covers a radiator with the same or higher heat output, new brackets if needed and disposal of the old one.
Qualifications and approvals
A radiator repair or like-for-like replacement needs no planning permission and is not notifiable under Building Regulations. In a flat, check before floors over shared pipes are lifted. Tenants should report the leak to their landlord or agent.
If you are not sure whether building control needs to know, ask North Northamptonshire/West Northamptonshire. If the job expands beyond a straightforward repair, confirm which approvals apply before the extra work starts.
Getting an engineer to Corby
Engineers covering Corby, Northamptonshire need the full postcode. Mention parking limits or permit zones. Photographs showing the leak and floor around the radiator help with planning. Neighbouring houses often have different systems, so describe the one in yours.
Surrounding towns and villages
Each postcode in Northamptonshire is matched on its own. The businesses able to reply depend on the job and their coverage.
Kettering, Market Harborough, Wellingborough, Oakham, Rushden, Stamford, CottesmoreSend the details when you are ready
The free enquiry form takes a couple of minutes. We ask engineers who join for their insurance details and references, but look at their current documents yourself before you book. We pass on your enquiry. The business you choose gives the advice, sets the price and carries out the work.
For a suspected gas leak in Great Britain, call 0800 111 999 straight away. This service does not arrange emergency call-outs. In Northern Ireland, the gas emergency number is 0800 002 001; for LPG, contact your supplier.
Answers to common heating questions
How can I compare quotes for leaking radiator repair in Corby?
Fill in one enquiry form with your postcode and details of the leaking joint or radiator panel and any pressure loss. It can go to as many as four independent heating engineers who work in Corby. How many reply varies with the job and how busy engineers are, and booking any of them is up to you.
Roughly how much is leaking radiator repair in Corby?
We use £90–£350 as a UK guide. Engineers in Corby price their own work, and the system, access and parts affect the total. A written quote should list labour, parts, VAT and any call-out fee.
Is a leaking radiator an emergency?
A slow drip is not usually an emergency, but put a container and towel under it and check the boiler pressure. If water is pouring out, close both radiator valves if you can and get help directly.
Can I tighten a leaking radiator valve myself?
A gland adjustment can sometimes stop a spindle leak, but overtightening can crack an old valve. Leave the repair to an engineer if you are unsure where it leaks; do not loosen a union or work on hot pipework.
What should I do while waiting for the repair?
Put a towel and container under the leak and keep an eye on the boiler pressure. If pressure falls below the level in your boiler manual, switch the heating off and ask the engineer what to do. Repeated topping up feeds an unresolved leak.
How long should I allow for leaking radiator repair?
Allow 1–3 hours as a guide. Once the engineer has seen the system, they should tell you how long the heating or hot water will be off. Waiting for a part or awkward access can add time.