Get prices to repair a radiator leak in Exmouth
A drip under one end of a radiator usually comes from the valve or the nut beside it. Note which joint is wet without touching hot pipework.
One short description of the problem in Exmouth can reach up to four independent heating engineers, depending on who works in your postcode. The matching is free. You can turn down every quote.
What the engineer will check
Most radiator leaks come from the valve spindle, the union joining the valve to the radiator, the bleed screw or a pipe joint below. A smaller number come from the radiator panel itself, where internal corrosion has made a pinhole, and those radiators are normally replaced.
What you might be seeing
- Water marks on the floor beneath a valve
- Water on a valve spindle or union nut
- Mineral deposits around a radiator fitting
- Rust spots on the radiator face
- Topping up the boiler more and more often
What the engineer does
The engineer should find the exact source before quoting. The visit usually covers:
- Drying the area and tracing exactly where the water escapes.
- Shutting both valves to isolate the radiator, or partly draining if they will not close.
- Repacking the gland, remaking the joint, changing the bleed screw or swapping the radiator.
- Refilling and bleeding the radiator, and topping up pressure and inhibitor.
- Running the heating and checking the repair stays dry when hot.
A leak from the panel means the radiator is wearing out
When water comes through the face or seam of the radiator rather than a joint, the steel is corroding from inside. Sealer can slow it for a while, but other thin spots are likely. Ask for a price on a like-for-like radiator with the same heat output.
Access and finishing up
Move furniture away from the leak if it is safe to do so. Ask who will protect the floor, remove a failed radiator and make good any access opening; repair of water-damaged flooring is not automatically part of a plumbing quote.
The cost of leaking radiator repair in Exmouth
Our indicative allowance is £90–£350. Engineers here price their own work. Tightening or repacking a valve gland, or changing a bleed screw, sits at the lower end. Resealing a valve tail with the radiator isolated is in the middle. A new radiator, or a leak below the floor, takes the job to the top of the range or beyond.
Ask for the call-out fee, parts and labour to be shown separately, with VAT stated. Allow 1–3 hours for the work itself; awkward access or waiting for a part can take longer.
Before you send the form
Say which radiator is leaking, which end, and whether the water comes from the valve, the joint or the panel. Give the radiator size if a replacement might be needed. Say whether the pipes come through a boarded, solid or tiled floor.
Then pin down what the price covers. Ask whether the quote includes refilling the system to pressure and adding inhibitor. For a replacement, check it covers a radiator with the same or higher heat output, new brackets if needed and disposal of the old one.
Rules that apply to the work
A radiator repair or like-for-like replacement needs no planning permission and is not notifiable under Building Regulations. In a flat, check before floors over shared pipes are lifted. Tenants should report the leak to their landlord or agent.
If you are not sure whether building control needs to know, ask Devon County Council. If the job expands beyond a straightforward repair, confirm which approvals apply before the extra work starts.
Booking leaking radiator repair near you
Engineers covering Exmouth, Devon need the full postcode. Note any communal entrance or parking permit. Send a clear photo of the leak and floor around the radiator. Neighbouring houses often have different systems, so describe the one in yours.
Other places around Exmouth
Each postcode in Devon is matched on its own. Availability can differ between neighbouring postcodes.
Dawlish, Teignmouth, Exeter, Sidmouth, Newton Abbot, Torquay, PaigntonCompare what local engineers include
The free enquiry form takes a couple of minutes. We ask engineers who join for their insurance details and references, but check insurance and recent experience of similar jobs before you hire anyone. We pass on your enquiry. The business you choose gives the advice, sets the price and carries out the work.
For a suspected gas leak in Great Britain, call 0800 111 999 straight away. This service does not arrange emergency call-outs. In Northern Ireland, the gas emergency number is 0800 002 001; for LPG, contact your supplier.
Before booking this work
How can I compare quotes for leaking radiator repair in Exmouth?
Fill in one enquiry form with your postcode and details of the leaking joint or radiator panel and any pressure loss. It can go to as many as four independent heating engineers who work in Exmouth. How many reply varies with the job and how busy engineers are, and booking any of them is up to you.
Roughly how much is leaking radiator repair in Exmouth?
We use £90–£350 as a UK guide. Engineers in Exmouth price their own work, and the system, access and parts affect the total. A written quote should list labour, parts, VAT and any call-out fee.
Is a leaking radiator an emergency?
A slow drip is not usually an emergency, but put a container and towel under it and check the boiler pressure. If water is pouring out, close both radiator valves if you can and get help directly.
Can I tighten a leaking radiator valve myself?
A gland adjustment can sometimes stop a spindle leak, but overtightening can crack an old valve. Leave the repair to an engineer if you are unsure where it leaks; do not loosen a union or work on hot pipework.
What should I do while waiting for the repair?
Put a towel and container under the leak and keep an eye on the boiler pressure. If pressure falls below the level in your boiler manual, switch the heating off and ask the engineer what to do. Repeated topping up feeds an unresolved leak.
How long should I allow for leaking radiator repair?
Allow 1–3 hours as a guide. Once the engineer has seen the system, they should tell you how long the heating or hot water will be off. Waiting for a part or awkward access can add time.